Top 10 Best Bandsaw Mill Blades [Update 2022]

Last Update:

You can trust our selection for Bandsaw Mill Blades Reviews. Because We have worked hard studying and analyzing 47760 reviews for Bandsaw Mill Blades and rating them. It was a difficult job to list only ten products for Bandsaw Mill Blades where thousands of them available online. I hope it will help you to take final decision for Best Bandsaw Mill Blades.

Comparison Chart for Best Bandsaw Mill Blades

In this article we've included our suggestions for the Bandsaw Mill Blades after analyzing 47760 reviews.

NoProductScoreAction
1Zchoutrade Portable Chainsaw Mill 14-36 Inch Portable Aluminum Steel Mig Welding Saw Mill 36 Inch Planking Lumber Cutting Bar9.6Check Price on Amazon
2Making Tiny Toys in Wood: Ornaments & Collectible Heirloom Accents (Fox Chapel Publishing) 15 Full-Size Scroll Saw Patterns for Wooden Toys that Move: Windmill9.6Check Price on Amazon
3Woodskil 3A 9-Inch Band Saw9.4Check Price on Amazon
4POWERTEC 13202 105" x 1/8" x 14 TPI Band Saw Blade9.2Check Price on Amazon
53423VPC 105" by 3/4" Timber Wolf Bandsaw Silicon Steel Low Tension Resaw Blade9Check Price on Amazon
6Timber Wolf Bandsaw Blade 1/4" x 93-1/2"9Check Price on Amazon
7Timber Wolf Bandsaw Blade 1/2" x 808.6Check Price on Amazon
8Carter Accuright® Log Mill™8.4Check Price on Amazon
9SKILSAW SPT55-11 16 In. Worm Drive SAWSQUATCH Carpentry Chainsaw8.2Check Price on Amazon
10Carter Bandsaw AccuRight Miter Mill8.2Check Price on Amazon
Disclaimer: As an Amazon Associate I Earn from Qualifying Purchases. But that doesn't change the price.

Table Of Content:

1. Zchoutrade Portable Chainsaw Mill 14-36 Inch Portable Aluminum Steel Mig Welding Saw Mill 36 Inch Planking Lumber Cutting Bar

  • High Quality Steel and Aluminum Construction
  • Cut Cedar, Walnut and Oak into High Quality Lumber
  • High-Quality Mill Cuts Beams or Lumber from 0.5“ ”To 13“ Thick and 36” Wide
  • Attaches to saw without drilling bar
  • This chainsaw is perfect for homeowners, woodworkers, carpenters, you can mill your own lumber at home or in the woods.

2. Making Tiny Toys in Wood: Ornaments & Collectible Heirloom Accents (Fox Chapel Publishing) 15 Full-Size Scroll Saw Patterns for Wooden Toys that Move: Windmill

3. Woodskil 3A 9-Inch Band Saw

  • Powerful and Efficient – 3A powerful low noise induction motor band saw with 2500FPM blade speed and 1720RPM motor speed.
  • Sharp and Quick – The blade size of bandsaw is length: 59-1/2 inches, width: 1/8 ~ 3/8 inches.
  • Accurate and Multi Angle – Band Saws for Wood has a sturdy cast aluminum table tilting from 0°to 45°with 120°miter gauge.
  • Safe and Stable – Double safety switch forms a double security protection.
  • Warranty: Woodskil always puts quality and customer satisfaction at the core, we will provide 2 years warranty, if you have any question, please feel free to contact us! Tip:for your safety and smarter use of this product, please read the manul carefully before use, and be sure to keep the manul.

4. POWERTEC 13202 105″ x 1/8″ x 14 TPI Band Saw Blade

  • Includes: 105 inch band saw blade (one piece) – suitable for most 105” long, 1/8” wide, 0.
  • Quality: the band saw blade is made from premium, high grade carbon steel with heat resistance and weld.
  • Design: This precision cutting tool is constructed with an optimal geometric tooth arrangement that provides seamless cutting results at high performance speeds.
  • Application: flexible carbon hard edge blade works perfectly with hard and soft woods, plastic, and plus non-ferrous metals.
  • Teeth specs: 14TPI blade has a raker set/ Regular teeth profile

5. 3423VPC 105″ by 3/4″ Timber Wolf Bandsaw Silicon Steel Low Tension Resaw Blade

  • Milled teeth are 50 PERCENT SHARPER than competitors stamped or crush ground blades
  • Precision Induction hardening throughout the blade vs competitors flame hardening
  • Tooth edge is 20 PERCENT harder than any high carbon steel resulting in extended sharp time
  • More ductile steel than any high carbon steel leads to extended flex life and a cooler running blade

6. Timber Wolf Bandsaw Blade 1/4″ x 93-1/2″

  • 935-1406PC: 93.5″ long x 1/4″ wide x 6TPI in Positive Claw (PC) tooth style
  • Other Blade Specifications: .042 kerf; 6.5 degree tooth angle; 5/8″ cut radius
  • Cutting Application: curve, template and pattern cutting or ripping and crosscutting
  • Suitable Material Thickness: kiln dry hardwood 3/4″ – 2-1/2″; softwood 1/2″ – 1-1/2″
  • Made in the USA

7. Timber Wolf Bandsaw Blade 1/2″ x 80

  • 80-1204PC: 80″ long x 1/2″ wide x 4TPI in Positive Claw (PC) tooth style
  • Other Blade Specifications: .042 kerf; 6.5 degree tooth angle; 2-1/2″ cut radius
  • Cutting Application: ripping and crosscutting
  • Suitable Material Thickness: kiln dry hardwood 2-1/2″ – 6″; softwood 1-1/2″ – 4″
  • Made in the USA

8. Carter Accuright® Log Mill™

  • CNC milled durable MDF table and adjustable miter bar
  • Rigid steel fence with indexing material clamp
  • Easy to assemble with complete hardware kit
  • No saw modifications, installs and dismantles in minutes
  • Supports heavy material up to 20″ long and 8″ wide

9. SKILSAW SPT55-11 16 In. Worm Drive SAWSQUATCH Carpentry Chainsaw

  • Worm drive gearing with electric brake delivers relentless power and proven durability
  • 14-1/4 in. Depth of cut to power through through deep Material in one pass
  • Self-lubricating, full house chain with tool-less tensioning provides high quality cuts
  • 15 amp Dual-Field motor stays cooler, increasing longevity and work efficiency
  • All magnesium construction for durability and reduced weight

10. Carter Bandsaw AccuRight Miter Mill

  • Easily cross-cut logs and square ends to make bowl blanks
  • Log is held in place by heavy gauge steel tooth v-jaws
  • Front is adjustable to handle logs up to 9” in diameter or larger
  • Contoured handle grips tightly for greater control
  • Steel miter guide bar adjusts to fit standard 3/4” x 3/8” miter slots

Bandsaw Mill Blades Buying Guide


Does the thought of finding a great Bandsaw Mill Blades stress you out? Has your mind been juggling between choices when it comes to buying Bandsaw Mill Blades in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Bandsaw Mill Blades for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Bandsaw Mill Blades Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Bandsaw Mill Blades in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Bandsaw Mill Blades currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Bandsaw Mill Blades brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Bandsaw Mill Blades based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Bandsaw Mill Blades before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Bandsaw Mill Blades they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Bandsaw Mill Blades, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Bandsaw Mill Blades before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Bandsaw Mill Blades will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Bandsaw Mill Blades if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Bandsaw Mill Blades on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Bandsaw Mill Blades on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Bandsaw Mill Blades featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.